Automatic Lubricators - Type M60, M150 & M250

These single-point electronically controlled lubricators offer precise & reliable delivery of lubricant by means of an electromechanical pump. With its precise operation, this lubricator is suitable for automatic lubrication of roller and sliding bearings, gear racks, open gears and chains and much more.

The lubricator is powered by a 6V Li high performance battery or externally by means of a 24V adapter. The replaceable lubricant cartridge, which comes in capacities of 60, 150 and 250 cc, is simply screwed to the lubricator, which is reusable. With a delivery pressure of 7.5 bar, the lubricator operates automatically and temperature-independently for up to one year.

The emptying time of the lubricator can be selected between 1 to 12 months and it is possible to change the setting or switch off the lubricator at any time. The control of the lubricator is carried out by a clearly visible LED screen. In addition, the level of the lubricant cartridge is visible at all times through the transparent housing.

The grease flow is pushed out continuously (not pulsating) at constant pressure according to the selected flow rate. Depending on application requirements, an emptying time of 1 to 18 months can be selected by setting the dip-switches on the lubricator.

For more detailed information, please check out the PDF catalog here.

Specifications

Model	M60	M150	M250
Pump Type	Electro-Mechanical (Reuseable)
Operating Pressure	Up to 7.5 bar
Empty Time	1 to 12 months
Empty Sensor	Visual & Red Light Indicator
Time or Pulse Control	Time Mode
Lubricant Amount	60 cc	150 cc	250 cc
Lubricant Types	Oils and Greases up to NLGI 2
Operating Temperature Range	-20º C to +60º C
Operating Voltage	6V Li Battery or 24V External Power
Weight Empty	510 g	570 g	700 g
Dimensions H x Ø	14.0 x 8.9 cm	16.6 x 8.9 cm	19.6 x 10.25 cm
Outlet Port Size	G1/4" or G1/2"
Performance Monitoring	Red / Green LED

Lubricant Flow Rates

The following table shows the lubricant flow rates of the automatic lubricators.

Lubricant Per Day (cc)			Lubricant Per Cycle (cc)			Lubricant Cycle (every X hours)	Months To Empty	DIP-Switch Setting
Model 60	Model 150	Model 250	Model 60	Model 150	Model 250	Lubricant Cycle (every X hours)	Months To Empty	DIP-Switch Setting
2.00	5.00	8.33	0.167	0.417	0.694	2	1	1
1.00	2.50	4.16				4	2	2
0.67	1.67	2.77				6	3	1+2
0.50	1.25	2.08				8	4	4
0.40	1.00	1.66				10	5	1+4
0.33	0.83	1.38				12	6	2+4
0.29	0.71	1.19				14	7	1+2+4
0.25	0.63	1.04				16	8	8
0.22	0.56	0.90				18	9	1+8
0.20	0.50	0.92				20	10	2+8
0.18	0.45	0.75				22	11	1+2+8
0.17	0.42	0.69				24	12	4+8

Lubricator Design